Wall Tiling Dublin

Wall Tiling Services in Dublin

Wall tiling can provide a durable, cleanable finish while defining the colour, pattern and character of a room. Accurate preparation and setting out are especially important because corners, sockets, worktops, sanitary fittings and changes in level make every wall different.

OS Holding provides wall tiling services in Dublin for homeowners, landlords, property professionals and commercial clients. We install suitable ceramic, porcelain, natural stone, mosaic and large-format wall tiles, subject to the condition of the background and the manufacturer’s intended use.

Wall Tiling for Different Rooms

Bathroom Wall Tiling

Bathroom wall tiles must be planned around showers, baths, sanitary fittings, niches, windows, doors and access panels. In wet areas, the preparation and waterproofing approach must be agreed before the tile installation begins.

We can provide bathroom wall tiling as an agreed standalone scope or coordinate it with a complete bathroom renovation. Coordinating the sequence helps the plumbing, waterproofing, sanitary ware and tiled finishes work together.

Shower Wall Tiling

Shower walls need suitable backgrounds, careful waterproofing details and an installation planned around trays, valves, screens, niches and changes of plane. Tile size and layout can affect the position of cuts and grout lines around these features.

We inspect the proposed shower area before confirming the preparation and installation scope. Existing moisture damage, loose finishes or unsuitable boards may need to be addressed before tiling.

Kitchen Wall Tiling and Splashbacks

Kitchen wall tiling may include splashbacks, full-height sections and tiled areas between worktops and wall units. The layout should be coordinated with the finished worktop, sockets, cooker, extractor, cabinets and exposed edges.

For a wider project, wall tiling can be included within our kitchen renovation service. This allows cabinetry, electrical work, plumbing, worktops and tiling to be planned in the right order.

Utility Rooms and Other Interior Walls

Wall tiles can provide a practical finish behind sinks, appliances and work surfaces in utility rooms and similar spaces. We assess the background, proposed coverage, tile format and edge details before the work begins.

Commercial Wall Tiling

Suitable wall tiles can be used in washrooms, staff kitchens, reception areas and other commercial interiors where a hard-wearing, cleanable finish is required. Access, working hours, existing wall condition, material specification and project phasing are reviewed during the survey.

Wall and Floor Tiling

Many kitchens, bathrooms and renovation projects include both wall and floor tiling. The setting out and work sequence should be considered together so grout lines, corners, thresholds and adjoining finishes form a coherent result.

This page focuses on wall surfaces. For information about substrates, room uses, tile formats and installations underfoot, visit our dedicated floor tiling service in Dublin.

Wall Tile Materials and Formats

Ceramic Wall Tiles

Ceramic tiles are available in a wide range of colours, textures and sizes. Many products are designed specifically for walls, making them suitable for decorative layouts, splashbacks and bathroom surfaces when correctly specified.

Porcelain Wall Tiles

Porcelain products can provide durable wall finishes and are available in formats that imitate stone, concrete, timber and other materials. Their weight, size and background requirements must be checked before installation.

Natural Stone

Natural stone offers variation in colour and texture. Depending on the material, it may require particular adhesives, sealing and maintenance. The stone and proposed location should be assessed before the method is agreed.

Mosaic and Patterned Tiles

Mosaics, geometric patterns and repeating designs require accurate reference lines. We plan focal points, borders, corners and the relationship with fittings so the pattern remains balanced across the wall.

Large-Format Wall Tiles

Large-format tiles create fewer grout lines but place greater demands on wall flatness, handling, cutting and fixing. The wall and proposed tile are assessed before the preparation and installation approach is confirmed.

Preparing Walls Before Tiling

A tiled finish is only as reliable as the wall behind it. During the survey, we check whether the background is sound, clean, sufficiently flat and suitable for the proposed tile and fixing system.

Depending on the existing wall and agreed scope, preparation may include:

• Removal of loose, contaminated or unsuitable finishes
• Cleaning and priming the background where required
• Local repairs and surface correction
• Installation of an appropriate tile backer or preparation layer
• Waterproofing in relevant wet areas
• Checking corners, junctions and changes of plane
• Planning edges, trims and transitions to painted surfaces
• Reviewing sockets, pipework, fittings and access points

The required method is property-specific. It will be confirmed after the wall, room conditions and proposed tile have been inspected.

Wall Tile Layout and Finishing Details

Setting out determines where grout lines, full tiles and cut pieces will appear. We establish reference lines around the most visible features of the room rather than beginning from an arbitrary corner.

The layout may need to account for:

• Internal and external corners
• Worktops, units and splashback heights
• Baths, shower trays and sanitary fittings
• Windows, doors, niches and recesses
• Sockets, switches, valves and pipe penetrations
• Changes in tile colour, format or pattern
• Exposed edges and transitions to other finishes

These details are discussed before fixing begins so the finished wall follows a planned arrangement.

What Our Wall Tiling Service Can Include

Each quotation is based on the property, selected tile and agreed scope. Depending on the project, our wall tile installation service can include:

• Free, no-obligation site survey
• Measurement and layout planning
• Assessment of the existing wall background
• Preparation identified in the quotation
• Tile cutting and installation
• Adhesive and grout suited to the agreed specification
• Corner, edge, trim and transition details
• Silicone sealing where included and appropriate
• Coordination with plumbing, electrical and renovation work
• Final inspection and project handover

Tile supply, removal, disposal, waterproofing, backer systems, sealing and repair work will be identified in the quotation where applicable.

What Affects a Wall Tiling Quotation?

Wall tiling costs vary because the area and installation requirements differ from one project to another. Important factors include:

• Total tiled area and number of separate walls
• Condition and flatness of the existing background
• Removal of old tiles or other finishes
• Waterproofing or repair requirements
• Tile material, size, weight and pattern
• Corners, niches, sockets, fittings and detailed cuts
• Access and coordination with other trades
• Grout, trims, sealants and specialist finishing requirements

A site survey lets us inspect these details and prepare a quotation for the work actually required.

Why Choose OS Holding for Wall Tiling?

• Wall tiling for standalone projects and coordinated renovations
• Free site survey and project-specific quotation
• Residential and commercial project experience
• Careful background assessment and layout planning
• Experience with ceramic, porcelain, stone, mosaic and large-format tiles
• Coordination with plumbing, electrical and building work where included
• Clear communication throughout the agreed project
• Fully insured building and renovation contractor

Our Wall Tiling Process

1. Site Survey

We measure the walls, inspect the existing backgrounds and discuss the tile, layout, room conditions, fittings and surrounding work.

2. Scope and Quotation

We define the preparation, installation and finishing work included in the project. The quotation records the agreed scope rather than relying on a generic rate alone.

3. Wall Preparation and Setting Out

The walls are prepared as agreed. Reference lines are established around corners, fittings, worktops, sanitary ware, openings and focal points.

4. Wall Tile Installation

The tiles are cut and fixed using the agreed system, followed by grouting and finishing once the installation is ready.

5. Inspection and Handover

We inspect the completed work against the agreed scope and provide relevant care information for the installed surface.

Wall Tilers Serving Dublin

OS Holding provides wall tiling across Dublin and surrounding areas for homeowners, landlords, commercial clients and property professionals.

Whether you need a kitchen splashback, bathroom wall tiles, a shower enclosure or wall tiling within a larger home renovation, arrange a site survey so we can assess the walls and prepare a clear quotation.